I got drumagog 5 working in PT10 well and everything is triggering correctly with drumagog samples. However, if I use drumagog to trigger superior drummer, the hits are quieter e.g. the snare is triggered as if someone is hitting the drum softer than the actual performance ... am I doing this right? Increasing the input slider in drumagog helped somewhat ... do I need to turn up the track volume or the output slider?
Side note: if you have a snare top and bottom mic, do you bus them together and replace the combined sound or replace each mic. The drumagog samples don't tell me if its just the top mic or whatever... the superior drummer program has a top and bottom mic so thats all good.
triggering superior drummer
Re: triggering superior drummer
Hello,
You may just want to turn up the velocity in Superior Drummer for that specific drum. As per top/bottom mics, there isn't really a difference in Drumagog. You can use one or both to trigger new samples, either with full replacement or a blend, but there are no specific top/bottom samples.
Best,
Chris Miller
WaveMachine Labs
You may just want to turn up the velocity in Superior Drummer for that specific drum. As per top/bottom mics, there isn't really a difference in Drumagog. You can use one or both to trigger new samples, either with full replacement or a blend, but there are no specific top/bottom samples.
Best,
Chris Miller
WaveMachine Labs
