Drumagog 5.1 Update

Moderators: Rim, Corey W

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Drumagog 5.1 Update

Post by Jack » Fri Apr 08, 2011 11:38 am

WaveMachine Labs is pleased to announce a major update: Drumagog 5.1. This is a FREE update for all Drumagog 5 owners. Drumagog 5.1 contains both new features and a number of bug fixes, including the all-new BLEED REDUCTION feature.

New Features:
- Bleed Reduction feature allows Drumagog 5 to eliminate other drums from bleeding into a track and adding unwanted triggering. Simply setup Drumagog on each affected track and it will automatically remove the bleed. Check out Bleed Reduction in action here:
http://youtu.be/-WpQtc8NGqM?hd=1
- Added a “DIRECT” fader when using GOG files with room sounds
- Added License File authorization method
- Added support for Auto Hi-Hat Tracking in Plug-in Hosting and MIDI Output
- Added new Auto Hi-Hat control for adjusting choke level
- Added ability to save a GOG file copy with a new name
- Added Over 2 GB of samples to free library. Now includes the entire Rock Drums 3 and Ultra Drums libraries from Farview Recording. Free library is now nearly 7 GB total.

Bug Fixes
- Fixed Auto Hi-Hat Tracking instances with extremely fast hits
- Fixed issue when using MIDI or Plug-in Hosting in Live Triggering Mode
- Fixed issue where Default GOG folder setting did not always save
- Fixed issue where not all GOG file settings always saved in projects
- Fixed sample list display issue when working with large GOG files
- Fixed issue with Stealth Mode & Auto Ducking controls not displaying properly
- Resolved issue in Basic version for those who previously had Demo version installed
- Fixed issues with automation and preset management in Pro Tools
- Fixed issue when saving a Pro Tools project while hosting BFD2

For Drumagog 5 owners, you may go to http://www.drumagog.com and download this update from your My Account page.

Here is a link to the updated Getting Started Guide
http://www.drumagog.com/cms-assets/Drum ... 0Guide.pdf

Sample Library Download page
http://www.drumagog.com/support/downloads

Best Regards,
Rim Buntinas & The WaveMachine Labs Team

neilwilkes
Expert
Posts: 112
Joined: Mon Apr 24, 2006 2:56 am
Location: London, England
Contact:

Re: Drumagog 5.1 Update

Post by neilwilkes » Mon Apr 11, 2011 10:24 am

Should we uninstall existing versions before running the updated version, or just install "over the top"?
Nuendo 5, 5.5 & 6 and Cubase 6,7 & 7.5 with WK-ID Controller.
Fully 64-bit Intel Xeon E5-2687W 8-Core CPU with 32GB Quad Channel RAM
Adam A7 x 5, RME RayDAT 1 into 2 RME ADI-8 DS, Tascam DA-88 to RME ADI-8.

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Re: Drumagog 5.1 Update

Post by Jack » Mon Apr 11, 2011 11:14 am

Any new installation of Drumagog will just rewrite over any previous version on a system
Jack Goodall
WaveMachine Labs
http://www.drumagog.com

him
New Member
Posts: 3
Joined: Sat Jan 08, 2011 9:27 pm

Re: Drumagog 5.1 Update

Post by him » Tue Apr 12, 2011 12:11 am

5.1 requested me to process authorization, is it normal?

:?:

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Re: Drumagog 5.1 Update

Post by Jack » Tue Apr 12, 2011 9:19 am

This should certainly not happen if you authorized Drumagog 5 with an iLok license.

We have had some users, who previously authorized using Challenge/Response, need to go through with the new License Files authorization process once they installed the 5.1 update. Here are instructions:

License Files Authorization

If you do not own an iLok (or otherwise prefer not to use one),
Drumagog 5 can be unlocked via a License File system.

Once a customer has either purchased Drumagog 5 through
www.drumagog.com, or registered a retail copy purchased through a store, a special License File page will be accessible through the
My Account section of www.drumagog.com.

The first-time Drumagog 5 is opened without an iLok present (or
with an iLok present without a valid Drumagog 5 license) a
window will appear on-screen.

Press the “AUTHORIZE” button to continue. On the next screen,
UNCHECK the “USE ILOK” box and press NEXT to continue.

The next window will present the License File section:
Drumagog 5 will present a button to SAVE LICENSE REQUEST.
Click this button to create a License Request File that will be
saved to your system. Take note of where the file is saved, so you
can browse to it in a few moments.

Browse to drumagog.com and visit the “My Account” section (by
logging-in through the upper-right hand corner). Your copy of
Drumagog will appear in the list of registered products, and will
include an “AUTHORIZE THIS PRODUCT” link. You will then
be given a choice to authorize via iLok or License File. Select
License File to bring up the following page.

Click the CHOOSE FILE button to upload your saved License
Request File to the server. Click the AUTHORIZE button. After a
slight pause while the drumagog.com website contacts the
PACE/iLok servers, a License Response File will be generated and
you will see an “OK” message. Click the link below the message
to download the License Response File. Back in Drumagog, click
the READ LICENSE button. Select the License Response File that
was saved to your system to complete the License File
authorization process.
Jack Goodall
WaveMachine Labs
http://www.drumagog.com

romyrome
New Member
Posts: 1
Joined: Wed Apr 27, 2011 4:26 am

Re: Drumagog 5.1 Update

Post by romyrome » Wed Apr 27, 2011 4:50 am

Hi, i just purchased drumagog 5.1 and i,m having a problem locating the live trigger mode or advance mode so that i can get rid of the latency all that i,m seeing in settings mode or 2 faders named dynamic tracking and thee other hand timing and a set gog folder and also how do i drag in new zipped sample sounds folders into the gog folder.Thanks

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Re: Drumagog 5.1 Update

Post by Jack » Wed Apr 27, 2011 9:58 am

Hello,

Thanks for your recent purchase of Drumagog 5.1. If you are only seeing the Dynamic Tracking and Hand Timing faders, this likely means you are using Drumagog 5 Basic. Is this the version you purchased? If so, Basic only uses Advanced Triggering mode and does not come with Live Triggering mode. However, Advanced mode is the most accurate and you should not switch to Live Triggering mode if it is just a latency issue.

The latency issue can be caused by using an audio program without plugin delay compensation, such as Pro Tools 8 LE (or earlier), which has no delay compensation. A workaround for this is to shift the track 80 ms (the default latency setting in Drumagog 5) earlier. The newly released Pro Tools 9 includes built-in delay compensations (like every other product on the market), to eliminate the steps of bouncing and adjusting the track. So you could also upgrade to PT9.

As for the sample library files, you need to unzip them in order to use them first. Then, you can access them from anywhere on your system through the built-in File Browser in Drumagog 5. The default location to save the samples in is the GOG Files folder in the Drumagog 5 folder. You'll need to move your GOG files in your system's browser (not inside Drumagog).

Cheers,
Jack
Jack Goodall
WaveMachine Labs
http://www.drumagog.com

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Drumagog 5.11 Update

Post by Jack » Tue May 10, 2011 4:18 pm

Drumagog 5 users,

We have posted a minor update to Drumagog 5 that fixes a possible bug when loading saved sessions. The update is available now in your account under the My Downloads section (Drumagog 5.11 - Updated 5/10/2011)

Cheers,
Jack
Jack Goodall
WaveMachine Labs
http://www.drumagog.com

micjbox
New Member
Posts: 1
Joined: Sat Sep 11, 2010 2:45 pm

Re: Drumagog 5.11 Update

Post by micjbox » Tue May 10, 2011 8:30 pm

I don't see it there.......

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Re: Drumagog 5.11 Update

Post by Jack » Wed May 11, 2011 9:21 am

Thanks for pointing that out to us. The text for the Pre-ordered downloadables was not updated. However, if you had downloaded it would have been the 5.11 update. The text on the links has now been updated :)

Cheers,
Jack
Jack Goodall
WaveMachine Labs
http://www.drumagog.com

theoaronson
New Member
Posts: 2
Joined: Sun Jun 05, 2011 2:50 pm

Re: Drumagog 5.11 Update

Post by theoaronson » Sun Jun 05, 2011 3:21 pm

Just installed 5.11 update and tried using bleed reduction. Watched the video and followed all the steps. When I use it I get no signal from the receiving (snare) channel. When I turn off bleed reduction feature signal comes back and drumagog functions fine. Anyone else having issues with bleed reduction in pro tools?

System specs:

DAW: Pro Tools HD 8.1cs2
System: Mac Pro 2 x 2.93 GHz Quad-Core Intel Xeon 16 GB RAM / OS X 10.6.6

Jack
Expert
Posts: 193
Joined: Mon Sep 20, 2010 10:39 am

Re: Drumagog 5.11 Update

Post by Jack » Mon Jun 06, 2011 3:44 pm

Hello,

Can you describe the steps that you took to set up Drumagog's Bleed Reduction? What tracks are you sending the signal to the receiving (snare) track?

Cheers,
Jack
Jack Goodall
WaveMachine Labs
http://www.drumagog.com

jeffv
New Member
Posts: 2
Joined: Sat Mar 17, 2012 1:11 pm

Does Update Allow An Easier Registration Option ?

Post by jeffv » Sat Mar 17, 2012 1:20 pm

I Purchased Drumagog lastnight in hopes I could use it over the weekend. I have been very frustrated about the entire Authorization. I also didnt receive a receipt acknowledging that I had made a purchase. I Downloaded multi iLok drivers and helper programs still I lost as to how to register the program. Are there any other options I have to register my program? Or where can I find the answer (response) to the Authorize Question? Please, any help would be greatly appreciated.

Thanks Jeff

mixer05
Member
Posts: 10
Joined: Tue Apr 10, 2012 8:27 am
Location: Miami FL
Contact:

Re: Drumagog 5.1 Update

Post by mixer05 » Thu Apr 26, 2012 8:27 am

When will Drumagog be compatible with Protools 10 hd. Crashes everytime :o

Chris M
Expert
Posts: 150
Joined: Tue Oct 11, 2011 11:42 am

Re: Drumagog 5.1 Update

Post by Chris M » Thu Apr 26, 2012 9:36 am

Hello,

Drumagog should be compatible with ProTools10, we haven't had any trouble running it. Usually a consistent crashing can be solved by trashing ProTools Preferences, so see if that does the trick.

Best,

Chris
WaveMachine Labs

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest