Hi Guys.
I finally bit the bullet and bought a new 64-bit DAW, and wanted to know what the process is for getting D5 Platinum set up on the new system.
Do I need to deauthorize it & set it up again on the new machine, or will there be a second authorization if I just try it anyway? (probably not, but it never hurts to ask about it)
Thanks in advance
Swapping installation from old to new DAW
-
neilwilkes
- Expert
- Posts: 113
- Joined: Mon Apr 24, 2006 3:56 am
- Location: London, England
- Contact:
Swapping installation from old to new DAW
Nuendo 5, 5.5 & 6 and Cubase 6,7 & 7.5 with WK-ID Controller.
Fully 64-bit Intel Xeon E5-2687W 8-Core CPU with 32GB Quad Channel RAM
Adam A7 x 5, RME RayDAT 1 into 2 RME ADI-8 DS, Tascam DA-88 to RME ADI-8.
Fully 64-bit Intel Xeon E5-2687W 8-Core CPU with 32GB Quad Channel RAM
Adam A7 x 5, RME RayDAT 1 into 2 RME ADI-8 DS, Tascam DA-88 to RME ADI-8.
Re: Swapping installation from old to new DAW
Hello,
There should be a second authorization--if you run into a notice saying you've exceeded your limits of authorization, email us at support(at)drumagog.com and we'll help you out.
Best,
Chris
WaveMachine Labs
There should be a second authorization--if you run into a notice saying you've exceeded your limits of authorization, email us at support(at)drumagog.com and we'll help you out.
Best,
Chris
WaveMachine Labs
